Paramose R10B1 Paint and Varnish Stripper – Water Based - 20 Litres - £156.00

Paramose R10B1 is a new water based, low odour, water rinsable paint stripper.

LOW ODOUR, WATER BASED, WATER RINSABLE, DCM FREE FORMULA

NEW TRIPLE ACTIVE TECHNOLOGY outperforms conventional DCM Free strippers by penetrating deeper and blistering FASTER, removes over 20 layers of paint in one generous application. Easily removes various coatings.

Preparation

Always test an inconspicuous area before use to ensure the compatibility and finished result is acceptable. Protection should be provided for coatings that you do not wish to remove or any surface that may be damaged by i.e. perspex, plastics, rubber etc.

How to Apply

• Paramose R10B1 is supplied ready to use and should not be diluted
• Ensure the surface is completely dry before application
• Shake well before each use. Cover the top with a cloth during opening to avoid splashes
• Layer a generous, even coat onto the surface using a clean brush or airless spray (rollers can be used for light coatings) DO NOT BRUSH OUT
• Leave for one hour and apply a second generous coat. For less than 5 layers of Paint or Varnish, a second coat may not be necessary. After the product has penetrated the substrate (up to 24 hours) scrape off with suitable scrapers, leaving surface as clean as possible.
• Rinse clean with cold water containing detergent and a stainless steel scourer or scotch pad, leave do dry. NEVER USE STEEL WOOL – STAINLESS STEEL ONLY

You can also view a demonstration of the application and removal on YouTube.

COSHH Data Sheet Available on Request

R10B1 Paint and Varnish Stripper manufacturer in the UK by the makers of Paramose.

The colour of the Drum may vary.  

Click here to see photographs of customers jobs using Paramose.